La Marzocco 951/SX Left Side Coffee Boiler PID Retrofit Kit
- Industry professional installation and setup required
- 100% Satisfaction Guaranteed!
This new kit from La Marzocco includes almost everything you will need to either convert your existing machine to use PID control or replace old and/or worn components already installed in your equipment. It comes with a complete wiring diagram and step-by-step instructions.
The hardware included is the bracket and enclosure for the Fuji controller and Solid State Relay, mounting screws (x4) and a rubber cord restraint grommet for the wiring where it enters the enclosure. The bracket and enclosure are also used to secure the electronics inside the machine. The controller and SSR are already installed in the box and sit on the mounting bracket. On stock installations, this assembly is then attached to the inside of the leg frame, on the left-hand side of the machine as you are facing it. The enclosure then covers the electronics.
The electronics included are the controller, the SSR, the new version thermocouple and a wiring loom. A few words on the new thermocouple here: the old version threaded directly into the thermal well orifice of the boiler with an adapter fitting. The new version simply slides into the thermostat well and a brass bushing slips over the wire leads and holds it centered in place. This eliminates the need to remove the thermal well from the boiler, something many customers have had problems with in the past.
Shipping lead time is 1-2 business days.