FRIIA is the ideal solution for coffee shops, offices, break-rooms, schools, institutions, and small cafes.

The FRIIA Hot/Cold (HC) and Hot/Cold/Sparkling (HCS) include the multi-temp MIX UC3 110v or 220v Hot Water Boiler
Sleek and stylish with minimal counter-top space
23% more energy-efficient than leading competitors
Easy to install, service, and use
Two font heights available (9.7" standard and 12" tall)
The FRIIA Hands-Free Font is safe, hygienic, and eliminates a touchpoint
FRIIA is sold as a complete kit with font, boiler, chiller or chiller/carbonator, and drip tray (CO2 tank and water filter sold separately)
Marco recommends Everpure EV9612-56 filtration for cold water applications.
NSF and UL Certified
Industry professional installation and setup required

PRE-INSTALLATION TIPS: Before ordering FRIIA there are some important factors you may need to determine.

Capacity: FRIIA is designed to deliver 170 cups of boiler water/hr and between 210-240 cold or cold/sparkling cups of water/hr. It is not intended for high-volume output.
Counter cut-outs: FRIIA requires a 1.25″ diameter cut-out. If installing the drip tray you will need to cut an additional 4″ hole in your counter.
Undercounter space: FRIIA requires a minimum cabinet size of 600mm width x 600mm height x 600mm depth.
Ventilation: FRIIA requires ventilation at 2 points on the under-counter cabinet. Vents must be a minimum 300mm wide and 65mm high.
Maximum cable/hose length from Undercounter Module to Font Tap: 16"

To operate the cold water dispense simply press and hold the cold water button
To operate the sparkling water dispense simply press and hold the sparkling water button
To operate the hot water dispense press the hot button once, wait for the LED ring to turn red, then press and hold the hot water button

Warranty:

Includes a 12-month parts and labor warranty.

Please Note: you cannot use a standard under-counter boiler with other FRIIA components. FRIIA is sold as a complete kit.