Voltage Coffee Supply carries a wide variety of water filter kits for commercial coffee brewers, espresso machines, hot chocolate dispensers, and fountain and ice machines. While we highly recommend having your water filter kits installed by a licensed plumber and/or service technician we have outlined a few tips to keep in mind while you get you started!
Installation Tips:
- Choose a mounting location suitable to support the full weight of the system when operating
- Use 3/4" water line
- Install vertically with cartridges hanging down and allow 21 ⁄2" (6.35 cm) clearance below the cartridge for easy cartridge replacement
- Flush cartridges by running water through flushing valve for five (5) minutes at full flow
Operation Tips:
- Change cartridges on a regular six (6) month preventative maintenance program
- Change cartridges when capacity is reached or when pressure falls below 10 psi (0.7 bar)
- Change pre-filter cartridge when excessively dirty
- Always flush the filter cartridge at time of installation and cartridge change
Shop all commercial water filter kits
